WS-C2960L-48PQ-LL
| Model: | WS-C2960L-48PQ-LL - Cisco Catalyst 2960L Switch |
| Detail: |
Catalyst 2960L 48 port GigE PoE+. 4x10G SFP+. Lan Lite
|
WS-C2960L-48PQ-LL Overview
WS-C2960L-48PQ-LL offering 48 x GigE PoE+ ports, 4 x 10G SFP and LAN Lite, is one of the Cisco Catalyst 2960-L Series Switches. These 2960-L switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure and energy-efficient business operations with a range of Cisco IOS Software features.
WS-C2960L-48PQ-LL Specification
WS-C2960L-48PQ-LL Specification |
|
|
Configurations |
|
|
10/100/1000 Ethernet Ports |
48 |
|
Uplink Interfaces |
4 SFP |
|
Available PoE Power |
370W |
|
Fanless |
N |
|
Dimensions (H x D x W) |
1.73 x 11.5 x 17.5 in. (4.4 x 29.2 x 44.5 cm) |
|
Net Weight |
9.81 lb (4.54 kg) |
|
Console Ports |
|
|
RJ45 Ethernet |
1 |
|
USB mini-B |
1 |
|
USB-A port for storage and Bluetooth console |
1 |
|
Memory and Processor |
|
|
CPU |
ARMv7 800 MHz |
|
DRAM |
512 MB |
|
Flash memory |
256 MB |
|
Performance |
|
|
Forwarding bandwidth |
88 Gbps |
|
Switching bandwidth |
176Gbps |
|
Forwarding rate (64-byte L3 packets) |
77.38 Mpps |
|
Unicast MAC addresses |
8K |
|
Maximum active VLANs |
64 |
|
VLAN IDs available |
4094 |
|
Maximum STP instances |
64 |
|
Maximum SPAN sessions |
1 |
|
MTU-L3 packet |
9198 bytes |
|
Jumbo Ethernet frame |
10,240 bytes |
|
MTBF in hours (Data) |
1,370,769 |
|
MTBF in hours (PoE) |
437,970 |
|
Environment |
|
|
Operating temperature |
|
|
Up to 5,000 ft |
23ºF to 113ºF (–5ºC to 45ºC) |
|
Up to 10,000 ft |
23ºF to 104ºF (–5ºC to 40ºC) |
|
Operating altitude |
10,000 ft (3000m) |
|
Operating relative humidity |
5% to 90% at 40ºC |
|
Storage temperature |
–13º to 158ºF (–25º to 70ºC) |
|
Storage altitude |
15,000 ft (4500m) |
|
Storage relative humidity |
5% to 95% at 65ºC |
|
Storage altitude |
Minimum ambient temperature for cold start is 0°C (32°F) |
|
Electrical |
PoE |
|
Voltage (autoranging) |
110 to 220V AC in |
|
Frequency |
50 to 60 Hz |
|
Current |
0.37A to 0.64A |
|
Power rating (maximum consumption) |
0.48 kVA |
|
Power consumption (watts) 0% traffic 10% traffic 100% traffic Weighted average |
68.4 81.6 81.9 77.3 |
|
Safety and Compliance |
|
|
Safety |
UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
|
EMC: emissions |
47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
|
EMC: immunity |
EN55024, CISPR24, EN300386, KN24 |
|
Environmental |
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
|
Telco |
Common Language Equipment Identifier (CLEI) code |
|
U.S. government certifications |
USGv6 and IPv6 Ready Logo |
|
Connectors and Interfaces |
|
|
Ethernet interfaces |
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling |
|
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling |
|
|
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
|
|
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
|
|
Indicator LEDs |
Per-port status: link integrity, disabled, activity, speed, and full duplex |
|
System status: system, PoE, and link speed |
|
|
Console cables |
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
|
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors |
|
|
Power |
Use the supplied AC power cord to connect the AC power connector to an AC power outlet |