QSFP-40/100-SRBD=
| Model: | QSFP-40/100-SRBD= - Cisco 100 Gigabit Optical Modules |
| Detail: |
100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF
|
Chat with IT Networks
QSFP-40/100-SRBD= Overview
The Cisco® 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
QSFP-40/100-SRBD= |
|
Description |
100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
Nominal Wavelength (nm) |
855, 908 |
|
Cable Type |
MMF |
|
Core Size (Microns) |
50.0 50.0 |
|
Modal Bandwidth (MHz*km) |
2000 (OM3) 4700 (OM4) |
|
Cable Distance |
70m 100m |
|
Power Consumption (W) |
3.5 |
|
Pull Tab Color |
Gray |
Product Details
QSFP-100G Optical modules provide these highlights:
•Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port
•Interoperable with other IEEE-compliant 100GBASE interfaces where applicable
•Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability
•High-speed electrical interface compliant to IEEE 802.3bm
QSFP-40/100-SRBD= Specification
QSFP-40/100-SRBD= Specification |
|
|
Description |
100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
|
Nominal Wavelength (nm) |
855, 908 |
|
Cable Type |
MMF |
|
Core Size (Microns) |
50.0 50.0 |
|
Modal Bandwidth (MHz*km)*1 |
2000 (OM3) 4700 (OM4) |
|
Cable Distance |
70m 100m |
|
Power Consumption (W) |
3.5 |
|
Pull Tab Color |
Gray |
|
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
|
|
Optical characteristics |
|
|
Transmit Power (dBm) per lane*2 |
Max:+4 (100G) +5 (40G) Min:-6 (100G) -4 (40G) |
|
Receive Power (dBm) per lane*2*3 |
Max:4 (100G) 5 (40G) Min: -7.9 (100G) -6 (40G) |
|
Receive Power (dBm) per lane |
855, 908 |
|
*2 Transmitter and receiver power is average optical power, unless specified *3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation |
|
|
Environmental Conditions and Power Requirements |
|
|
Commercial temperature |
•100G: +10C to +60C •40G: +10C to +70C |
|
Storage temperature |
-40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
|
Standards |
•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013 •SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
|
Safety |
•Cable jacket of QSFP copper modules is UL E116441 Compliant •QSFP copper cables are ELV compliant |