C9200-48P-A
| Model: | C9200-48P-A - Cisco Switch Catalyst 9200 |
| Detail: |
Catalyst 9200 48-port PoE+ Switch, Network Advantage
|
C9200-48P-A Overview
C9200-48P-A is the Catalyst 9200 48-port PoE+ Switch, with Network Advantage software. Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.
Quick Spec
Table 1 shows the quick spec.
|
Model |
C9200-48P-A |
|
Downlinks total 10/100/1000 or PoE+ copper ports |
48-port Full PoE+ |
|
Uplink configuration |
Modular uplink options |
|
Default primary AC power supply |
PWR-C6-1KWAC |
|
Fans |
FRU redundant |
|
Software |
Network Advantage |
|
Stacking bandwidth |
160 Gbps |
|
DRAM |
4 GB |
|
Flash |
4 GB |
|
Switching capacity |
176 Gbps |
|
Forwarding rate |
261.9 Mpps |
|
Chassis Dimensions |
1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm |
Product Details
Catalyst 9200 series provides these highlights:
● Up to 48 ports of full Power over Ethernet Plus (PoE+) capability
● Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
● Flexible downlink options with data or PoE+
● Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
● UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
● Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
● Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
● Advanced network monitoring using Full Flexible NetFlow
● Cisco Software-Defined Access (SD-Access):
◦ Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
◦ Network assurance and improved resolution time through Cisco DNA Center™
● Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
● Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
● ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.
C9200-48P-A Specification
C9200-48P-A Specification |
|
|
Downlinks total 10/100/1000 or PoE+ copper ports |
48 ports full PoE+ |
|
Uplink configuration |
Modular uplink options |
|
Default primary AC power supply |
PWR-C6-1KWAC |
|
Fans |
FRU redundant |
|
Software |
Network Advantage |
|
Chassis Dimensions |
1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm |
|
Virtual Networks |
4 |
|
Stacking bandwidth |
160 Gbps |
|
Total number of MAC addresses |
32,000 |
|
Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
|
IPv4 routing entries |
4,000 |
|
IPv6 routing entries |
2,000 |
|
Multicast routing scale |
1,000 |
|
QoS scale entries |
1,000 |
|
ACL scale entries |
1,600 |
|
Packet buffer per SKU |
6 MB buffers for 24- or 48-port Gigabit Ethernet models |
|
Flexible NetFlow (FNF) entries |
16,000 flows on 24- and 48-port Gigabit Ethernet models |
|
DRAM |
4 GB |
|
Flash |
4 GB |
|
VLAN IDs |
4096 |
|
Total Switched Virtual Interfaces (SVIs) |
1000 |
|
Jumbo frames |
9198 bytes |
|
Wireless bandwidth per switch |
Up to 48 Gbps on 24-port and 48-port Gigabit Ethernet model |
|
Switching capacity |
176 Gbps |
|
Forwarding rate |
261.9 Mpps |
|
Mean time between failures (hours) |
375,570 |