C1000-48T-4X-L
Model: | C1000-48T-4X-L - Cisco Catalyst 1000 Series Switches |
Detail: |
48x 10/100/1000 Ethernet ports, 4x 10G SFP+ uplinks
|
C1000-48T-4X-L Overview
Cisco® Catalyst® 1000 Series Switches are fixed managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco® Catalyst® 1000 operate on Cisco IOS® Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.
Quick Specs
Table 1 shows the Quick Specs.
Product Code |
C1000-48T-4X-L |
Description |
48x 10/100/1000 Ethernet ports, 4x 10G SFP+ uplinks |
Gigabit Ethernet ports |
48 |
Uplink interfaces |
4 SFP+ |
PoE+power budget |
\ |
Fanless |
N |
Dimensions (WxDxH in inches) |
17.5 x 10.73 x 1.73 |
CPU |
ARM v7 800 MHz |
DRAM |
512 MB |
Flash memory |
256 MB |
Forwarding bandwidth |
88 Gbps |
Switching bandwidth |
176 Gbps |
Forwarding rate(64—byte L3 packets) |
77.38 Mpps |
Product Details
The Cisco Catalyst 1000 Series Switches provides these features:
* 8, 16, 24, or 48 Gigabit Ethernet data or PoE+ ports with line-rate forwarding
* 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+) uplinks
* Perpetual PoE+ support with a power budget of up to 740W
* CLI and/or intuitive web UI manageability options
* Network monitoring through sampled flow (sFlow)
* Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard
* Compact fanless models available with a depth of less than 13 inches (33 cm)
*Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access
- Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)
C1000-48T-4X-L Specification
C1000-48T-4X-L Specification |
|
Description |
48x 10/100/1000 Ethernet ports, 4x 10G SFP+ uplinks |
Gigabit Ethernet ports |
48 |
Uplink interfaces |
4 SFP+ |
PoE+power budget |
\ |
Fanless |
N |
Dimensions (WxDxH in inches) |
17.5 x 10.73 x 1.73 |
Console ports |
|
RJ-45 Ethernet |
1 |
USB mini-B |
1 |
USB-A port for storage and Bluetooth console |
1 |
Memory and processor |
|
CPU |
ARM v7 800 MHz |
DRAM |
512 MB |
Flash memory |
256 MB |
Performance |
|
Forwarding bandwidth |
88 Gbps |
Switching bandwidth |
176 Gbps |
Forwarding rate(64—byte L3 packets) |
77.38 Mpps |
Unicast MAC addresses |
16000 |
IPv4 unicast direct routes |
542 |
IPv4 unicast indirect routes |
256 |
IPv6 unicast direct routes |
414 |
IPv6 unicast indirect routes |
128 |
IPv4 static routes |
16 |
IPv6 static routes |
16 |
IPv4 multicast routes and IGMP groups |
1024 |
IPv6 multicast groups |
1024 |
IPv4/MAC security ACEs |
600 |
IPv6 security ACEs |
600 |
Maximum active VLANs |
256 |
VLAN IDs available |
4094 |
Maximum STP instances |
64 |
Maximum SPAN sessions |
4 |
MTU-L3 packet |
9198 bytes |
Jumbo Ethernet frame |
10,240 bytes |
Dying Gasp |
Yes |
MTBF in hours (data) |
1,452,667 |
MTBF in hours (PoE) |
856,329 |
MTBF in hours (Full PoE) |
856,329 |
Environmental |
|
Operating temperature Seal level |
-5 to 50 deg C* |
Up to 5,000ft (1500 m) |
-5 to 45 deg C |
Upto 10,000 (3000 m) |
-5 to 40 deg C |
Operating altitude |
10,000 ft (3,000m) |
Operating relative humidity |
5% to 90% at 40C |
Storage temperature |
-13 to 158F (-25 to 70C) |
Storage altitude |
15,000 ft (4500m) |
Storage relative humidit |
5% to 95% at 65C |
*Note: 50C operation is supported for short term operation only; GLC-BX-D/U and CWDM optics cannot support 50C operation; Minimum ambient temperature for cold start is at 0C (32F) |
|
Safety and compliance |
|
Safety
|
UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1 GB 4943.1-2011 |
EMC: Emissions
|
47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A |
EMC: Immunity |
EN55024 (including EN 61000-4-5), EN300386, KN35 |
Environmental |
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
Telco |
Common Language Equipment Identifier (CLEI) code |
U.S. government certifications |
TBD |
Connectors and interfaces |
|
Ethernet interfaces
|
* 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling * 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling * 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling * 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
Indicator LEDs
|
* Per-port status: link integrity, disabled, activity * System status: system |
Console cables
|
* CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 * CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors |
Power
|
* Use the supplied AC power cord to connect the AC power connector to an AC power outlet * Models have external power supply |